Fiberglass Duct Wrap, Grease Duct Wrap, Duct Liner, Duct Board, Plenum Insulation, Foam Duct Liner, Duct Insulation, Fire Wrap, Fyrewrap, HVAC, Weld Pins, Armaflex
MicroLok HP  FOAMGLAS  Armaflex

Phone: (716) 874-7278
Fax: (716) 871-3498
Email: info@industrialinsulation.com
Providing Quality Sales and
Service for Over 50 Years!

Image from: http://www.grsites.com

INDUSTRIAL INSULATION SALES, INC.
Insulation distributor & fabricator

Your Insulation Specialists for:
Pipes • Boilers • Equipment • Ducts • Fire Stopping • Fabrications

Product Temperatures Ranging From Cryogenic (297°F) to Refractory (+2000°F)

Credit Cards
Fiberglass Duct Wrap, Grease Duct Wrap, Duct Liner, Duct Board, Plenum Insulation, Foam Duct Liner, Duct Insulation, Fire Wrap, Fyrewrap, HVAC, Weld Pins, Armaflex

Duct Wrap, Grease Duct Insulation, Duct Liner, Duct Board, Fyrewrap® - HVAC
_______________________________________________________________________________

Note: Not all items are listed so give us a call if you don't see what you are looking for.

FyreWrap® Elite® 1.5 Duct Insulation - Grease Duct - Single Layer

Unifrax FyreWrap® Elite® 1.5 Duct Insulation is a single-layer flexible enclosure for 1 and 2 hour fire-rated commercial kitchen grease ducts and hazardous exhaust ducts including chemical fume ducts.

(Click here for more Product Information and MSDS)

FyreWrap Duct Insulation

Back to Home Page

Credit Cards


Contact Information:

Email:
info@industrialinsulation.com

Main Office:
2101 Kenmore Ave.
Buffalo, NY 14207
Ph: (716) 874-7278
Fax: (716) 871-3498

Branch:
631 Trabold Rd.
Rochester, NY 14624

FyreWrap® Elite® 1.5 Duct Insulation - Grease Duct - Double Layer

Unifrax FyreWrap® Elite® 1.5 Duct Insulation is a 2 layer flexible enclosure for 1 and 2 hour fire-rated commercial kitchen grease ducts and hazardous exhaust ducts including chemical fume ducts.  FyreWrap® Elite® Duct Insulation is acceptable as an alternate to a traditional fire-rated shaft.

(Click here for more Product Information and MSDS)

FyreWrap Duct Insulation

FyreWrap® 0.5 Plenum Insulation

Unifrax FyreWrap® 0.5 Plenum Insulation is a high temperature insulation blanket specifically designed to provide a single layer, flexible enclosure around combustible items located within fire-rated return air plenums.

(Click here for more Product Information and MSDS)

FyreWrap Plenum Insulation

Fiberglass Duct Wrap

Fiberglass duct wrap is used for external insulation of commercial and residential heating, air conditioning and dual-temperature ducts operating at temperatures from 40°F (4°C) to 250°F (121°C).

(Click here for more Product Information and MSDS)

Fiberglass Duct Wrap

Fiberglass Duct Liner

Fiberglass duct liner is designed to be installed inside sheet metal ductwork and plenums.  Fiberglass duct liner absorbs noise and contributes to indoor comfort by lowering heat loss or gain through duct walls.

(Click here for more Product Information and MSDS)

Fiberglass Duct Liner

Fiberglass Duct Board

Fiberglass duct board is a rigid, resin bonded fiberglass board with a damage resistant, flame retardant reinforced aluminum foil (FSK) facing. It provides excellent thermal and acoustical insulating properties.

(Click here for more Product Information and MSDS)

Fiberglass Duct Board

AP Armaflex® Sheet and Roll Insulation

AP Armaflex® sheet and roll insulation is a closed cell elastomeric thermal insulation. It retards heat gain and controls condensation drip from chilled-water and refrigeration systems.  AP Armaflex® sheet and roll uses include insulating ductwork, large piping, fittings, tanks, vessels and curved or irregular surfaces.

(Click here for more Product Information and MSDS)

Armaflex Sheet and Roll Insulation

Gripnail Fasteners

Gripnail fasteners are a mechanical fastener used to attach insulation to sheet metal.  Gripnail fasteners withstand pulls up to 120 lbs and has superior corrosion resistance.

(Click here for more Product Information and MSDS)

Gripnail Fastener

Weld Pin Fasteners

Weld pins are a mechanical fastener specifically designed to work with all available duct liners and standard resistance welding type application equipment.  Hardened steel point assures positive electrical contact for complete sheet to pin fusion.

(Click here for more Product Information and MSDS)

Weld Pin Fastener
Home | Pipe Insulation | Blanket Insulation | Board Insulation | Duct Insulation | Firestop Products
Spray Foam Insulation | Jacketing & Fitting Covers | Pre-Insulated Pipe Supports | Application Accessories
Fabricated Insulation | Clear-Outs | Manufacturer Links | Insulation Comparison Chart | Request Credit Application