Spray Foam Insulation, E84 Spray Foam Insulation, Foam Insulation, Fire Retardant Spray Foam, Fire Rated Spray Foam, Spray Foam Kit, Handi-Foam

MicroLok HP  FOAMGLAS  Armaflex

Phone: (716) 874-7278
Fax: (716) 871-3498
Email:
info@industrialinsulation.com


Providing Quality Sales and
Service for Over 50Years!

Image from: http://www.grsites.com

INDUSTRIAL INSULATION SALES, INC.
Insulation Distributor & Fabricator

Your Insulation Specialists for:
Pipes • Boilers  • Equipment • Ducts • Fire Stopping • Fabrications

Product Temperatures Ranging from Cryogenic to Refractory
(-297
°F to +2000°F)

Credit Cards

Spray Foam Insulation, E84 Spray Foam Insulation, Foam Insulation, Fire Retardant Spray Foam, Fire Rated Spray Foam, Spray Foam Kit, Handi-Foam

E84 Class 1 Fire Retardant Spray Foam - Hand-Foam®

E84 Class 1 Spray Foam Insulation Kits

Handi-Foam® E84 Class 1 Fire Retardant spray foam insulation kit has all the same properties and advantages of it's standard Two-Component spray foam insulations but is also rated for applications requiring a fire retardant insulation meeting ASTM E84 Class 1 standards.

In conjunction with an ASTM E84 Class 1 foam, Handi-Foam® E84 Class 1 spray foam insulation utilizes a non-flammable, non-ozone depleting blowing agent for better safety for the user and the environment. Handi-Foam® ASTM E84 Class 1 spray foam insulation is free of brominated flame retardants.

Handi-Foam® E84 Class 1 spray foam kits are ideal for applications of cold air draft sealing along the band joint in basements and crawl spaces.

Handi-Foam® E84 Class 1 fire rated spray foam insulation is closed cell, has a density of 1.75 lbs per cubic foot and an R-value of 6.2 per inch. The spray foam is tack-free in less than a minute, can be trimmed and cut in 2-5 minutes and are completely cured in several hours. Foam yield is best when the foam container contents are properly warmed to a range of 75F-85F. E84 spray foam insulation can be trimmed, sanded and painted. E84 spray foam insulation is not UV resistant unless painted or stained.

Applications:

  • Full home insulation

  • Insulating band joists

  • Wine storage rooms

  • Metal building wall and ceiling insulation

  • Stage designs

  • Hot tubs and Spa's

  • Recreational vehicles

  • Cold storage & Agricultural building

  • Structural support and sound deadening

IMPORTANT:
Always read all operating, application and safety instructions before using any products from Fomo Products, Inc.

Use in conformance with all state and local building codes and federal regulations; obtain building code approvals before use, and follow all safe handling requirements.

User of this product must determine suitability for any particular purpose, including, but not limited to, structural requirements, performance specifications and application requirements prior to installation and after product has been properly applied.

Back to Home Page

E84 Spray Foam - Handi-Foam

Submittal Sheet

MSDS

________________________

Contact Information

Email:
info@industrialinsulation.com

Main Office:
2101 Kenmore Ave.
Buffalo, NY 14207
Ph: (716) 874-7278
Fax: (716) 871-3498

Branch:
631 Trabold Rd.
Rochester, NY 14624

Home | Pipe Insulation | Blanket Insulation | Board Insulation | Duct Insulation | Firestop Products
Spray Foam Insulation | Jacketing & Fitting Covers | Pre-Insulated Pipe Supports | Application Accessories
Fabricated Insulation | Clear-Outs | Manufacturer Links | Insulation Comparison Chart | Request Credit Application