|
FyreWrap® Elite™ 1.5 Duct Insulation - Grease Duct - Single Layer
Unifrax’s FyreWrap® EliteTM 1.5 Duct Insulation is a single-layer
flexible enclosure for 1- and 2-hour fire-rated commercial
kitchen grease ducts and hazardous exhaust ducts including
chemical fume ducts.
(Click Here for Product Information and MSDS)
|
 |
FyreWrap® Elite™ 1.5 Duct Insulation - Grease Duct - Double Layer
Unifrax’s FyreWrap® EliteTM 1.5 Duct Insulation is a two-layer
flexible enclosure for one- and two-hour rated commercial
kitchen grease ducts and hazardous exhaust ducts including
chemical fume ducts. FyreWrap Elite 1.5 Duct Insulation is
tested per ASTM E-2336 and is acceptable as an alternate to
a traditional fire-rated shaft.
(Click Here for Product Information and MSDS)
|
 |
FyreWrap® 0.5 Plenum Insulation
Unifrax's FyreWrap® 0.5 Plenum Insulation is a high temperature
insulation blanket specifically designed to
provide a single layer, flexible enclosure around combustible
items located within fire-rated return air plenums.
(Click Here for Product Information and MSDS)
|
 |
Firestop Silicone Sealant
Nelson Firestop Silicone Sealant is
flexible sealant used to protect from the spread of fire, smoke,
gases and water It is designed for applications of through firestop penetrations and in construction joints.
(Click Here for Product Information and MSDS)
|
 |
Firestop Compound
Firestop Compound has been tested for a
wide range of penetrants including metallic pipes, cables, cable
trays, as well as combustible penetrants such as insulated pipes.
(Click Here for Product Information and
MSDS) |
 |
|
Firestop Composite Sheet
Nelson Firestop Composite sheet is a
rigid, elastomeric, fire resistant panel used to seal penetration
and maintain the rating of fire rated floors or walls.
(Click Here for
Product Information and MSDS) |
 |
|
Firestop Elastomeric Sealant
Nelson Firestop Elastomeric Sealant is a
cost effective, water based acrylic latex, endothermic, fire
protective sealant.
(Click Here for Product
Information and MSDS) |
 |
|
Firestop Cable Coating
Nelson Firestop Fire Protective Cable
Coating is water based, intumescent, fire protective coating
designed to enhance the fire resistance of electrical power,
communication and control cables.
(Click Here for Product Information and MSDS) |
 |
|
Firestop Joint Coating
Nelson Firestop Fire Protective Joint
Coating is water based, acrylic latex, elastomeric, fire protective
coating for use on construction joints.
(Click Here for Product Information and MSDS) |
|
|
Firestop Putty Bar and Pad
Nelson Firestop putty is ideal for metallic and
non-metallic pipes, insulated pipes, cables and ductwork in a
variety of fire rated floor or wall construction.
(Click Here for Product Information and MSDS) |
|
|
Firestop Latex Sealant
Nelson Firestop Latex Intumescent
Sealant is an elastomeric, water based, fire protective sealant.
(Click Here for Product Information and MSDS) |
 |
|
Firestop Pipe Choke System
Nelson Firestop Pipe Choke System is a
pre-fabricated device used to seal penetrations and maintain the
rating of fire rated floors and walls.
(Click Here for Product Information and MSDS) |
|
|
Firestop Pillow
Firestop pillows are classified as a
permanent firestop system for several applications including steel
and aluminum cable trays and is also an excellent temporary seal.
(Click Here for Product Information and MSDS) |
 |
|
Firestop Wrap Strip
Firestop Wrap Strip WRS3™ is a highly intumescent firestop wrap system that expands and forms a hard char to seal off the penetrating
item and preventing the passage of fire and hot gasses.
(Click Here for Product Information and MSDS) |
 |